Konfigurasi EIGRP Cisco Packet Tracer 2 Router

EIGRP (Enhanced Interior Gateway Routing Protocol) adalah routing protocol yang hanya di adopsi oleh router cisco atau sering disebut sebagai proprietary protocol pada cisco. Dimana EIGRP ini hanya bisa digunakan sesama router cisco saja. Bagaimana bila router cisco digunakan dengan router lain seperti Juniper, Hwawei, dll menggunakan EIGRP??? Seperti saya bilang diatas, EIGRP hanya bisa digunakan sesama router cisco saja. EIGRP ini sangat cocok digunakan utk midsize dan large company. Karena banyak sekali fasilitas-fasilitas yang diberikan pada protocol ini.

Topologi

Keterangan :

Bagian kiri :
PC0 FastEthernet0/0 : 192.168.1.1/24
Router0 GigabitEthernet 0/0 : 192.168.1.254/24

Bagian tengah :
Router0 GigabitEthernet0/1 : 10.10.10.1/30
Router1 GigabitEthernet0/1 : 10.10.10.2/30

Bagian kanan :
Router1 GigabitEthernet0/0 : 192.168.2.254/24
PC1 FastEthernet0/0 : 192.168.2.1/24

Konfigurasi :

Router0 :

Konfigurasi IP

Router>ena
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int gi
Router(config)#int gigabitEthernet 0/0
Router(config-if)#ip add 192.168.1.254 255.255.255.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
exit
Router(config)#int gi0/1
%Invalid interface type and number
Router(config)#int gi1/0
Router(config-if)#ip add 10.10.10.1 255.255.255.252
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to up

Router(config-if)#exit

Konfigurasi EIGRP

Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up

Router(config)#router eigrp 20

Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up

Router(config)#router eigrp 20
Router(config-router)#net 192.168.1.0
Router(config-router)#net 10.10.10.0
Router(config-router)#ex
Router(config)#
%DUAL-5-NBRCHANGE: IP-EIGRP 20: Neighbor 10.10.10.2 (GigabitEthernet1/0) is up: new adjacency

Router1

Konfigurasi IP

Router>ena
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int gi0/0
Router(config-if)#ip add 192.168.2.254 255.255.255.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
Router(config)#exit

Router(config)#int gi1/0
Router(config-if)#ip add 10.10.10.2 255.255.255.252
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up

Router(config-if)#ex

Konfigurasi EIGRP

Router(config)#router eigrp 20
Router(config-router)#net 192.168.2.0
Router(config-router)#net 10.10.10.0
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 20: Neighbor 10.10.10.1 (GigabitEthernet1/0) is up: new adjacency

Router(config-router)#ex
Router(config)#